Optical Fiber Fluorescence Detector - Specifications/Options
Specifications (FLE1000)
Target fluorescent materials:
- B type: FITC, FAM, SYBR Green, GFP, etc.
- G type: Cy3, Resorufin, etc.
- R type: Cy5, etc.
- U type: UV dye(under development)
Sensitivity: Detection limit of 1 nM or less (depending on the specimen and its shape)
Required amount of sample: 1 μL or less (even a DNA array chip of 0.1 mm in diameter can be measured)
Sampling cycle: Standard: 0.1 second (between 0.1 second and 1 hour depending on the data loading software)
Data output: Analog or RS232C output (RS232C data loading software is available)
Size: 130×160×40 mm
Power supply: DC24V (a converter from AC100 V is available)
Measurement spot: 0.2 mm in diameter (can be specified)
Probe head: 4 mm in diameter (using the SELFOC® Micro Lens)
Upper temperature limit of probe: Up to 110°C
* This product can be customized as a fluorescence detection module for various types of analyzers.
Options available (including those under development)
Other wavelengths - Excitation by near-ultraviolet and violet rays (under development)
Simultaneous measurements at two wavelengths - (under development)
Manual probe stage - The probe position can be fine-adjusted in the x, y and z directions on the flat sample stage.
